Polymaker
PETG Lite
一般打印参数设置
透明零件打印参数设置
- 喷头孔径0.4mm
| 项目 | 参数 |
|---|---|
| Layer Height | 0.05 mm |
| Infill Density | 100% |
| Infill overlap percentage | 6% |
| Flow | 106% |
| Infill Speed | 24 mm/s |
| Wall Speed | 12 mm/s |
| Initial Layer Speed | 15 mm/s |
| Enable Print Cooling | OFF |
| Printing Temperature | 245 °C |
| Build Plate Temperature | 80 °C |